Elox100plus
Simple, robust technology in Stainless Steel
The Elox100 series was designed to have low operating and service cost. For example, all models have a self-cleaning measurement cell, automatic calibration and a power consumption of less than 50 watts.
The stainless steel Elox100plus has been proven by end users to have outstandingly low service and operational costs, even in continous mode!
The robust construction of the Elox100plus of LAR Process Analysers AG is well suited to the difficult conditions which prevail at waste water and industrial waste water treatment plants, thus ensuring many years of satisfactory operation.
Measurement and Sample Preparation
| Type of Measurement |
COD measurement by electrochemical oxidation |
| Measurement Range |
ranging from 1 - 100 and max. 1 - 100,000 mg/l COD |
| Accuracy |
5 % |
| Repeatability |
5 % |
| Response Time |
30 seconds |
| Sample Preparation |
maintenance-free particle separator FlowSampler |
Operation and Data Output
| Graphic-LCD-screen, high resolution, back-lit |
| Autostart-function |
| Self-explanatory software including maintenance checklists and support |
| Industry standard data interface |
Connections
| Waste water, drain |
tube 30 mm ID or threaded 32 mm OD or as specified |
| Electrical Power |
230 / 100 V ~, 50 / 60 Hz, 50 VA |
| Analog Output |
0 / 4 - 20 mA |
| Serial Interface |
RS 232 for remote control
malfunction alarm
life-zero
connection for printer |
Dimensions and Weight
| Cabinet |
Stainless Steel IP 64 (NEMA 4X) |
| Dimensions |
720 x 600 x 420 mm (H x W x D)
28.4 x 23.6 x 13.7 inches (H x W x D) |
| Weight |
45 kg (99 lbs) |
